Assembly Overview - Door Handle And Door Lock - Volkswagen Golf 2004 Workshop Manual

Golf 2004 ➤
General body repairs, exterior - Edition 04.2008
1.14

Assembly overview - door handle and door lock

Note
Only the left side is shown. The procedure for the right side is similar.
1 - Door lock
❑ Removing and installing
⇒ page 72
2 - Cable
❑ To release lock from
outer door handle
3 - Bolt
❑ To secure lock on door
inner part
❑ 18 Nm
❑ Qty. 2
4 - Bearing plate
❑ Removing and installing
⇒ page 70
5 - Bolt
❑ For lock cylinder
6 - Locking screw
❑ Not fitted on all models
❑ This bolt is installed to
provide additional se‐
curity for the bearing
plate
7 - Base
8 - Lock cylinder housing
❑ Only on driver side
❑ Installed on the passen‐
ger side is just a housing
❑ Removing and installing
⇒ page 67
9 - Cover
❑ For lock cylinder housing
❑ Secured to lock cylinder housing with three locking lugs
10 - Key
❑ Changing battery
❑ Adapting new or additional key to remote control and immobiliser
11 - Door handle with base
❑ Removing and installing
12 - Base
❑ Part of door handle
13 - Torx screw
❑ Socket -T 10072-
14 - Spreader rivet
❑ Not installed on Golf
66
Rep. Gr.57 - Front doors, door components, central locking
⇒ page 82
⇒ page 68
⇒ page 81