Table of Contents
Advertisement
Getting Started
Mounting Detector Adapter and Heating Block
3. Mount the detector adapter on the top of the ECD paying attention to
Installation Guide
interposing the aluminium seal provided. Fix the adapter by using the two
fixing Allen screws as shown in Figure 1-23.
1. Heater Adapter
Figure 1-23. Mounting the Detector Adapter
1. Cover and Detector Chimney
Figure 1-22. Preparing ECD Detector
2. Aluminium Seal
Upgrade Kit
NPD Tandem Detector
1
1
2
27
Advertisement
Table of Contents
