Setting Up Your Pc To Recognize The Print Server; Installing And Setting Up Firstgear-Diskette Option - NETGEAR PS104 Installation And Reference Manual

Installation and Reference for the Model PS104/PS105/PS110 Print Server
Click on Finish.
12.
The FirstGear Print Server Program is now installed on your PC.
You must now set up your PC to print to the print server. Proceed to
Recognize the Print

Setting Up Your PC to Recognize the Print Server

Refer to page 4-8 for instructions on setting up your PC to recognize the print server.
Installing and Setting Up FirstGear—Diskette Option
Use this option if your system does not have a CD-ROM drive.
To install the FirstGear software:
Insert a blank diskette into the Drive A, and click on OK, as illustrated in
1.
The diskette installation will not work in any other drive but drive A, and you must also use a
high-density disk.
Figure 4-26. Install From Disk Window
Refer to "Installing and Setting Up FirstGear—User
2.
the installation and setup process.
For information about the advanced setup procedures for the NETGEAR print server, refer to
Chapter 7, "Using Advanced Management
4-24
Server" on page 4-8.
Tools."
"Setting Up Your PC to
Installation" on page 4-2
Microsoft Windows NT Printing
Figure 4-26.
to continue with