Microsoft Windows Nt Printing; Firstgear For Print Server - NETGEAR PS104 Installation And Reference Manual

This chapter describes how to configure and use the NETGEAR Model PS104/PS105/PS110 print
server in a Microsoft Windows NT networking environment.
To correctly configure your hardware and software for the Microsoft Windows platform, you must:
• Install FirstGear for Print Server software.
• Run Setup
• Configure the user PC to print to the NETGEAR print server.

FirstGear for Print Server

This section describes how to install and set up the print server with the FirstGear for Print Server
Program in Windows NT. There are several options to choose from:
• User Installation—used through the NetBEUI protocol, this option is geared toward the user
who is already connected to the LAN and needs to set up a PC to the NETGEAR print server.
• Admin Installation—this option is geared toward the user who is connected to the LAN and
also manages the print server.
• User Installation with diskette—this option generates an installation floppy disk for the user
without a CD-ROM drive.
To install and set up your network and your print server for the NETGEAR print server, you must
be using a PC with a Windows 95, Windows 98, Windows NT 4.0, or Windows NT 3.51 operating
system and with either the TCP/IP protocol or the NetBEUI protocol enabled.

Microsoft Windows NT Printing

Microsoft Windows NT Printing
Chapter 4
4-1