This appendix provides a brief overview of IP addressing.
Overview
This appendix is intended only when the user has inadvertently disabled the DHCP protocol and/or
assigned a wrong subnet IP address. Refer to
Table E-1
describes each setting.
Table E-1.
IP Configuration Settings
Setting
Device Name
Device IP Address
Gateway IP Address
Subnet Mask
Clicking on Reset will set all values back to zero, and clicking on OK sets the data entered.
Ensure that the IP address assigned to the device is not already in use.
IP Setup
Recommended Value
Shown on a sticker on the base of the device in the form
"PSxxxxxx."
192.168.0.1
0.0.0.0
0.0.0.0.
Table E-1
to assign a static IP address.
Appendix E
IP Setup
E-1