Setting Rprinter Mode In A Netware 4.X Nds Mode Network - NETGEAR PS104 Installation And Reference Manual

Installation and Reference for the Model PS104/PS105/PS110 Print Server
Select Execute Change.
j.
Press [Enter] when asked if you are sure.
k.
Press [Esc] when a window opens indicating that the configuration is complete.
l.
Press [Esc] to return to the Active Device List main menu.
m.
You can press F2 to make sure that the new print server name is activated, if it was
changed.
Press [Esc] to exit the PSCONFIG program.
n.
Your print server is now set up in the NetWare networking environment. You can access the print
server using NetWare commands printing to the designated queue or printer.

Setting RPRINTER Mode in a NetWare 4.x NDS Mode Network

Make sure that you are running Client32 in the NDS mode before configuring the print server as a
NetWare NDS Remote Printer.
To configure the NDS file server to use the Model PS104/PS105/PS110 print server in RPRINTER
mode:
Execute the PCONSOLE program from the System volume of the file server.
1.
The Available Options window opens. Make sure that the following five menu selections are in
the window:
• Print Queues
• Printers
• Print Servers
• Quick Setup
• Change Context
If you do not see these five menu selections, you are not running Client32. You will have to
exit PCONSOLE, log out, and log in to the NDS file server when you have Client32 installed.
Configure the file server using Quick Setup.
2.
To configure the file server using Quick Setup:
Select Quick Setup from the Available Options window.
a.
5-16 Novell NetWare Printing