Installing And Setting Up Firstgear-Admin Installation; Figure 3-19. Firstgear Introductory Window - NETGEAR PS104 Installation And Reference Manual

Installing and Setting Up FirstGear—Admin Installation
Choose this option if you are using Windows 95 or Windows 98 to install, print, and manage the
NETGEAR print server.
Note: It is necessary to install the FirstGear software on every PC in the network that
will use the printers attached to the Model PS104/PS105/PS110 print server.
To install the NETGEAR print server software for admin installation:
Turn on the power to your PC.
1.
Insert the NETGEAR Resource CD-ROM.
2.
The NETGEAR window briefly opens, and the FirstGear Introductory window, as illustrated
in Figure 3-19, opens.
If it does not, click on Start > Run > and then type in "Install.exe" at the prompt (for example,
"D:Install.exe") to start the installation process.
Figure 3-19. FirstGear Introductory Window
Microsoft Windows 95 and Windows 98 Printing
Installation and Reference for the Model PS104/PS105/PS110 Print Server
3-17