List Of Ftp Files And Commands Supported By The Print Server; Table 6-1. Ftp Files In The Directory; Table 6-2. Ftp Commands - NETGEAR PS104 Installation And Reference Manual

Installation and Reference for the Model PS104/PS105/PS110 Print Server
Copy the CONFIG file back to the print server and then reset the device by using the
7.
commands:
ftp NAME
ftp>put CONFIG
ftp>get RESET
Quit by using the command:
8.
ftp>quit

List of FTP Files and Commands Supported by the Print Server

Table 6-1 lists the file names that appear in the directory.
Table 6-1. FTP Files in the Directory
File Name Purpose
CONFIG Configuration file
PSINF Device information
DEFAULTC Reset device to default configuration
RESET Reset device
PASSRESET Clear password
SETIP Save current IP address
Table 6-2 lists the case-sensitive commands that are implemented. When a command requires a
parameter, the parameter is shown in italics.
Table 6-2. FTP Commands
Command Function
dir Lists files as shown in
get FILENAME Retrieves a file. The only files that can be retrieved are CONFIG and PSINF.
get RESET Resets the print server and terminates the current connection.
get PASSRESET Clears the password.
get SETIP Sets the current IP address as a static IP address.
To avoid an address conflict, do not use this command if a DHCP server assigned the IP
address to the print server.
6-8
Mode
Read/Write
Read
Read
Read
Read
Read
Table 6-1.
UNIX Printing Using TCP/IP