Testing The Telephone Headset; Testing The Telephone Speaker; Testing The Power Supply To A Telephone - Nortel Enterprise Edge Feature Programming Telephone Manual

Testing the telephone headset

The headset test is not available to telephones that do not have a headset jack or a
headset plugged in.
1. Press
ƒ°‚fi
2. Press or
TEST
You should hear dial tone through the headset. The volume is reset to a default level
during the test.
Pressing any button ends the test.

Testing the telephone speaker

1. Press
ƒ°‚fi
2. Press or
TEST
You should hear page tone through the telephone speaker at the maximum volume.
The volume returns to its previous setting when you end the test.
Pressing any button ends the test.

Testing the power supply to a telephone

1. Press
ƒ°‚fi
2. Press or
TEST
You should see all the indicators on the telephone go on and hear ringing at
maximum volume. When the test has ended, the display should briefly show
.
Power OK
The test lasts for five seconds or until you press a button.
P0908510 Issue 01
, then or
£
to go ahead with a headset test.
˙
, then or
£
to go ahead with a speaker test.
˙
, then or
£
to go ahead with a power supply test.
˙
Enterprise Edge Feature Programming Telephone Guide
until the display reads
NEXT
until the display reads
NEXT
until the display reads
NEXT
Troubleshooting 147
.
Headset test
.
Speaker test
.
Power test