Quick Reference Table - Supermicro X12STD-F User Manual

Super X12STD-F User's Manual

Quick Reference Table

Jumper Description
J1 SATA/SAS Select
JBM1 Disable IPMI Share LAN
JBT1 CMOS Clear
JPG1 VGA Enable/Disable
JPME2 Manufacturing Mode
JPO1 CPU Throttle When PWR_Fail
JPT1 Onboard TPM Enable/Disable
JWD1 Watchdog Timer
LED Description
LED1 Unit Identifier LED
LED2 OH/Power Fail/FAN Fail
LEDM1 BMC Heartbeat LED
Connector Description
BT1 Onboard Battery
J2 CPU MICRO-LP PCIe 4.0 x8 Slot
J3 RESET Button (Debug Only)
JKVM1 KVM Connector
JMD1 M.2 Slot (PCIe 3.0 x4/I-SATA 3.0)
JMD2 M.2 Slot (PCIe 3.0 x4/I-SATA 3.0)
JPCIE1 CPU PCIe 4.0 x8 Slot
JTPM1 Trusted Platform Module/Port 80 Connector
JVR1 VRM SMBus to Header
JUIDB1 UID Switch
SAS1, SAS2 SAS Ports
SRW1 - SRW5 M.2 Mounting Holes
S-SGPIO1 Serial Link General Purpose I/O Header
SW1 Power Switch, Power LED
USB0/1 USB 2.0 Ports
USB2 USB 3.2 Type C Port
Note: Table is continued on the next page.
Default Setting
Pins 1-2: Onboard SATA
Pins 2-3: AOC SAS
Pins 1-1 (Enabled)
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 2-3 (Disabled)
Pins 2-3 (Disabled)
Pins 1-2 (Reset)
Status
Solid Blue: Unit Identified
Blinking Red: Power Fail or FAN Fail
Solid Red: Overheat
Blinking Green: BMC Normal
12