Table of Contents
Advertisement
Super X12STD-F User's Manual
Port 61h Bit-4 Emulation
Select Enabled to enable the emulation of Port 61h bit-4 toggling in System Management
Mode (SMM). The options are Disabled and Enabled.
PCIe PLL SSC
Use this feature to enable or disable PCIe PLL SSC. The options are Enabled and Disabled.
Super IO Configuration
•
Super IO Chip AST2600
Serial Port 1 Configuration
Serial Port
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This feature displays the status of the serial port.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of the
serial port. Select Auto to allow the BIOS to automatically assign the base I/O and IRQ
address. The options are Auto, (IO=3F8h; IRQ=4;), (IO=2F8h; IRQ=4;), (IO=3E8h; IRQ=4;),
and (IO=2E8h; IRQ=4;).
Serial Port Console Configuration
COM1 Console Redirection
Select Enabled to enable console redirection support for the serial port. The options are
Disabled and Enabled.
*If the feature above is set to Enabled, the following features are available for
configuration:
COM1 Console Redirection Settings
Terminal Type
This feature allows you to select the target terminal emulation type for Console Redirection.
Select VT100 to use the ASCII Character set. Select VT100+ to add color and function
key support. Select ANSI to use the Extended ASCII Character Set. Select VT-UTF8 to
use UTF8 encoding to map Unicode characters into one or more bytes. The options are
VT100, VT100+, VT-UTF8, and ANSI.
68
Advertisement
Table of Contents
