Supermicro X12STD-F User Manual page 3

About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the motherboard.
About This Motherboard
The Supermicro X12STD-F supports the Intel® Xeon E-2300 Family processor and Pentium
processor with up to eight cores. Built with the Intel PCH C256 chipset, the X12STD-F
supports 128GB DDR4 ECC and Non-ECC UDIMM memory with speeds of up to 3200MHz,
1Gb dedicated BMC LAN via 2 ports with the BPN, and a Trusted Platform Module (TPM)
header onboard. This motherboard also features superior IO expandability, which includes
two M.2 slot, two PCIe 4.0 x8 slots, and two NVME/SATA/SAS (PCIe 3.0 x4 and SATA 3.0
x2) through a BPN. Please note that this motherboard is intended to be installed and serviced
by professional technicians only. For processor/memory updates, please refer to our website
at http://www.supermicro.com/products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Warning! Indicates high voltage may be encountered while performing a procedure.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or to provide in-
formation for proper system setup.
Preface
3
Preface