Supermicro X12STD-F User Manual page 58

Super X12STD-F User's Manual
Wait For "F1" If Error
Use this feature to force the system to wait until the "F1" key is pressed if an error occurs.
The options are Disabled and Enabled.
INT19 Trap Response
Interrupt 19 is the software interrupt that handles the boot disk function. When this feature
is set to Immediate, the ROM BIOS of the host adapters will "capture" Interrupt 19 at boot
up immediately and allow the drives that are attached to these host adapters to function as
bootable disks. If this feature is set to Postponed, the ROM BIOS of the host adapters will not
capture Interrupt 19 immediately and allow the drives attached to these adapters to function
as bootable devices at boot up. The options are Immediate and Postponed.
Re-try Boot
If this feature is enabled, the BIOS automatically reboots the system from a specified boot
device after its initial boot failure. The options are Disabled, Legacy Boot, and EFI Boot.
Power Configuration
Watch Dog Function
If enabled, the Watch Dog Timer allows the system to reset or generate NMI based on jumper
settings when it is expired for more than five minutes. The options are Disabled and Enabled.
Front USB Port(s)
Use this feature to enable or disable front USB ports. The options are Enabled, Disabled,
and Enabled (Dynamic).
Rear USB Port(s)
Use this feature to enable or disable rear USB ports. The options are Enabled, Disabled,
and Enabled (Dynamic).
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay Off for the system
power to remain off after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay Off, Power On, and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
4 Seconds Override to power off the system after pressing and holding the power button for
four seconds or longer. Select Instant Off to instantly power off the system as soon as you
press the power button. The options are Instant Off and 4 Seconds Override.
58