Quick Reference Table - Supermicro H12SSW-iNL User Manual

H12SSW-iNL/NTL Motherboard User's Manual

Quick Reference Table

Jumper Description
UID SW Unit ID switch (push-button toggle switch ON/OFF)
JBT1 Clear CMOS
JPB1 BMC enable/disable
JVRM1 I C Bus for VRM
2
JPL1 LAN enable/disable (H12SSW-NTL only)
JPG1 Onboard video disable/enable
LED Description
LED1 UID LED
LED6 Power LED
LED11 M.2-C1 Interface Detection
LED12 M.2-C2 Interface Detection
LED14 BMC Heartbeat
Connector Description
Battery (BT1) Onboard CMOS battery
COM 1, COM 2 Rear panel COM port #1, header for COM port 2
FAN 1~6 System cooling fan headers
JF1 Front control panel
JSD1, JSD2 SATA DOM power connector
JTPM1 Trusted Platform Module (TPM)/Port 80 connector
SATA16, SATA17 Internal SATA Ports
JL1 Chassis intrusion header
JOH1 Chassis overheat header
USB 0/1 (3.0) Back panel USB 3.0 ports (USB 0/1)
USB 2/3 (3.0) Back panel USB 3.0 ports (USB 2/3)
USB 4 (3.0) USB 3.0 type A port (USB 4)
USB 5/6 (3.0) Internal USB 3.0 header (USB 5/6)
SXB1A, SXB1B, SXB1C Slots for Supermicro riser cards
JIP2C1 PWR supply (I2C) System Management Bus
JPWR2 24-pin ATX power supply connector
Note: The table above is continued on the next page.
Default Setting
Off
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (BMC: Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Status
Blue: UID Activated
On: Power On
On: SATA Off: PCIe
On: SATA Off: PCIe
Blinking: BMC Normal/Working
12