Dimm Installation; Dimm Removal - Supermicro X12STD-F User Manual

Super X12STD-F User's Manual

DIMM Installation

1. Insert DIMM modules in the following
order: DIMMB2, DIMMA2, then DIMMB1,
DIMMA1. For the system to work properly,
please use memory modules of the same
type and speed.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Push both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
MH7
Release Tabs
30
JKVM1
USB0/1
USB2 (3.0)
MH1 MH2
SW1
MH3
JMD2 JMD1 JTPM1
JMD1: M.2-H
JMD2: M.2-H
PCIe 3.0 X4 / I-SATA 3.0 PCIe 3.0 X4 / I-SATA 3.0
MH8
LEDM1
JPME2
SRW3 SRW1
JWD1
J3
J2
JBM1
SRW4 SRW2
JPCIE1
BIOS LICENSE
BAR CODE
SRW5
BT1
MAC CODE
JBT1
X12STD-F
REV: 1.02
S-SGPIO1 DESIGNED IN USA
MH6
CPU
MH4
MH9
JPWR1
Notches
Push both ends
straight down into
the memory slot.