Setting The Unit Cost For Paper - Canon ImagePROGRAF iPF680 User Manual

iPF680

Setting the Unit Cost for Paper

Setting the Unit Cost for Paper

Opens the Paper sheet. This sheet is used to configure the unit cost of paper.
Setting Standard Prices
1
Select the media type in Media Type.
2
Enter the Width and Length of the paper, as well as the Price for the area of the configured width x height.
3
Click the Add button. To change the unit cost of a media type that has already been configured, click the Over-
write button.
4
Click the OK button.
• The settings are not applied until you click the OK button.
Important
Specifying Price by Roll Paper
1
Select the media type in Media Type.
User's Guide
Setting the Unit Cost for Paper
515