Grandstream Networks WP820 Administration Manual page 52

Select the transport protocol over which log messages will be carried.
Syslog
● UDP: Syslog messages will be sent over UDP (the default setting).
Protocol
● SSL/TLS: Syslog messages will be sent securely over TLS connection.
Selects the level of logging for syslog. The default setting is "None".
There are 4 levels from the dropdown list: DEBUG, INFO, WARNING and ERROR. The following information will be
included in the syslog packet:
● DEBUG (Sent or received SIP messages).
Syslog
● INFO (Product model/version on boot up, NAT related info, SIP message summary, Inbound and outbound
Level
calls, Registration status change, negotiated codec, Ethernet link up).
● WARNING (SLIC chip exception).
● ERROR (SLIC chip exception, Memory exception).
Note: Changing syslog level does not require a reboot to take effect.
Syslog Configures the URI which the phone will send the syslog messages to.
Server
The default setting is "log.ipvideotalk.com".
Syslog
Only send the syslog with keyword, multiple keywords are separated by comma. Example: set the filter keyword
Keyword
to "SIP" to filter SIP log.
Filter
Logcat
Clear
Clears the log files saved in the phone by pressing the clear button.
Log
Log Tag Configures the filter to display the specified process log file.
Selects the log priority to display. It can be selected from list below:
● Verbose (Default Setting)
● Debug
Log
● Info
Priority
● Warn
● Error
● Fatal
● Silent (suppress all output)
Get Log Get the log files saved in the phone.
Debug
One-click Debugging
One-
Captures the checked info in the debugging list, click "Start" to debug if including "Capture trace" item and click
click
"Stop" to end, Click "Capture" in another situation. All retrieved files will be generated to a package, and the last
Debuggi
package will be overwritten, while the trace file will stay remain.
ng
Displays a list of info items that can be debugged, currently supports system logs, info log, capture trace,
Debug
tombstones, ANR log and Battery Log.
Info
The captured data can be viewed in "Debug information list".
Menu
The default is all selected.
Selects the existing debugging info package or grab package.
Debug
Info List Click the "Delete" button on the right to delete the file.