Grandstream Networks WP820 Administration Manual page 33

Hold Call
Before
If you choose "Yes", the transfer call status will be kept as hold status after Attended transfer operation.
Completing
Transfer
Enable Enable the conference. When "unchecked", the phone will block the conference function. The default
Conference setting is "checked".
Enable noise Configures whether to enable noise shield feature. If enabled, all the background noise will be suppressed
Shield except the sound from speaker.
Enable In-call
If set to "Yes", the device can record during a call; if set to "No", this feature is hidden during a call.
Recording
Enables the call waiting feature. If it is unchecked, the phone will reject the second incoming call during an
Enable Call
active session without user's knowledge. But this missed call record will be saved to remind users. The
Waiting
default setting is "checked".
Sets the phone to play the call waiting tone if there is another incoming call.
Enable Call
If it is "Unchecked", the phone will only display the indicator on the LCD screen for another incoming call.
Waiting Tone
The default setting is "checked".
If set to "Yes", the phone will automatically turn the screen off when near the proximity sensor during a
Enable
call.
Proximity
Note : If proximity sensor is disabled, the LCD screen will not turn off during call when handset is held near
Sensor
the ear.
Incoming/Outgoing Call
Determines if the speaker will play the ringtone if the speaker channel is not set as default channel. If set
Always Ring
to "Yes", the phone will force to play the ring speaker in speaker channel even if a headset is connected.
Speaker
The default setting is "checked".
Configures whether to mute the call on entry automatically.
● If set to "Disable", then do not use auto mute function.
● If set to "Auto Mute on Outgoing Call", then mute automatically when the other party answers the
Auto Mute on
outgoing call.
Entry
● If set to "Auto Mute on Incoming Call", then mute automatically when answers the incoming call.
● If set to "Mute on Incoming & Outgoing Call", then mute automatically when the call gets through.
Note: This function only takes effect when the phone is switching from the idle status to call status. Users
could click the Mute button on the call interface to cancel the current mute status.
Rejected Call Specifies whether to enable Rejected calls notification. When enabled, a missed call notification will
Notification prompt on LCD after rejecting an incoming call.
Enable DND Enables the DND reminder ring. If set to "Yes", the ring splash that indicates an incoming call when DND is
Reminder Ring enabled will be played.
Off hook Auto Configures a User ID/Extension to dial up automatically after the off-hook auto dial delay time ends when
Dial the phone is off hook or hands-free. The phone will use the first account to dial out by default.
Defines the delay time of Off hook Timeout. Once configured Off hook Timeout, the phone will dial out
Off hook Auto
automatically after the delay time ends. If not configured Off hook Timeout, there will be no delays and the
Dial Delay (s)
phone will dial up the User ID/Extension automatically.
Off hook/On If configured, the phone will exit the dial-up screen when timeout after off hook or on hook. The valid
hook Timeout range is 10-60s.
(s)