Grandstream Networks WP820 Administration Manual page 27

Send Anonymous
Intercept Anonymous
Calls
Call Log
Enable Call Features
Mute on Answer Intercom
Call
Transfer on 3-way
Conference Hang up
Use # as Dial Key
Use # as Redial key
DND Call Feature On
DND Call Feature Off
No Key Entry Timeout (s)
Ring Timeout (s)
Refer-To Use Target
Contact
RFC2543 Hold
Call Forward Type
Sets the phone to make anonymous outgoing calls; when set to "Yes", the "From" header in
outgoing INVITE messages will be set to anonymous, essentially blocking the Caller ID to be
displayed. The default setting is "No".
Rejects the calls whose SIP INVITE message includes Anonymous information in from header
when enabled. The default setting is "No".
Categorizes the call logs saved for this account. The default setting is "Log All".
● If it is set to "Log All", all the call logs of this account will be saved.
● If set to "Log Incoming/Outgoing Calls (Missed Calls Not Record)", the whole call history will
be saved other than missed call.
● If it is set to "Disable Call All", none of the call history will be saved.
● If it is set to "Don't Prompt Missed Call", the phone will log the missed call histories, but
there is no prompt to indicate the missed calls on phone LCD.
Configures the local call features. If set to "Yes", call features (including call forwarding, DND
and etc.) will be supported locally instead of using the feature code supported on SIP
server/proxy.
When enabled, phone will set mute feature upon answering incoming intercom calls. The
corresponding P-values for Account1 and Account2 are respectively: P26071 and P26171 with
possible values 0 for 'OFF' and 1 for 'ON'.
Transfers conference from hosted party when hang up, thus other parties can continue the
conference without interruption. The default setting is unchecked.
Allows users to configure the "#" key as the "Send" key. If set to "Yes", the "#" key will
immediately dial out the input digits. In this case, this key is essentially equivalent to the "Send"
key. If set to "No", the "#" key is treated as part of the dialed string.
Allows users to configure the "#" key as the "Redial" key. If set to "Yes", the "#" key will
immediately redial the last call. In this case, this key is essentially equivalent to the "Redial"
key. If set to "No", the "#" key is treated as part of the dialed string.
Configures the feature code to enable the DND (Do Not Disturb) feature for this account. If it is
configured, the phone will dial the feature code automatically when the DND feature is enabled.
Configures the feature code to disable the DND (Do Not Disturb) feature for this account. If it is
configured, the phone will dial the feature code automatically when the DND feature is disabled.
Determines the expiration timer (in seconds) for no key entry. The dialed digits will be sent out
if no other digits entered within the set period. The default value is 4 seconds.
The valid range is from 1 to 15.
Defines the expiration timer (in seconds) for the rings with no answer. The default setting is 60.
The valid range is from 10 to 300.
Sets the phone to use the target's Contact header tag to the Refer-To header in the SIP REFER
message during an attended transfer.
The default setting is "No".
Allows users to toggle between RFC2543 hold and RFC3261 hold.
RFC2543 hold allows user to disable the hold music sent to the other side (c=0.0.0.0 will be
used in INVITE SDP for hold). RFC3261 will play the hold music to the other side.
Call Forward
Sets the Call Forwarding feature for this account.