Grandstream Networks WP820 Administration Manual page 39

Headset device, and can answer and dial calls for the paired device after enabled.
Mode
Bluetooth Enables/Disables Bluetooth function. The WP820 can be found by nearby Bluetooth devices after enabled.
Bluetooth Scan available devices and complete the pairing. After enables Bluetooth function, automatically scan the
Devices available Bluetooth devices.
Wi-Fi Settings
Wi-Fi Basics
Select which Internet protocol to use from dropdown list:
● Both, prefer IPv4.
IP
● Both, prefer IPv6.
Mod
● IPv4 Only.
e
● IPv6 Only.
When both IPv4 and IPv6 are enabled, phone attempts to use preferred protocol first and switches to the other
choice if it fails.
Wi-
Fi
Sign Selects Wi-Fi warning level. When the Wi-Fi signal strength is lower than the threshold set by this level, the device
al will warning.
War
ning
Wi-
Enables/disables the Wi-Fi feature.
Fi
Func
The default setting is "Disable".
tion
Configures the Wi-Fi frequency band from the dropdown list:
Wi-
Fi
● 2.4G
Ban
● 5G
d
● Dual band (2.4 G & 5G)
Allows to scan and select the available Wi-Fi networks within the range if the Wi-Fi feature is enabled. Click on
"Connect" to select the Wi-Fi network and connect to. The ESSID will be auto filled in the ESSID filed, users can also
ESSI
click on "Details" to have more details about the connected ESSID with its status, strength, speed, frequency, and
D
security mode. User can set the IPv4 and IPv6 type to either DHCP or Static IP when clicking on "Show Advanced
Options".
Add Network
ESSI Determines the ESSID of the default Wi-Fi network. The default password is "wp!987@dmin" and it uses WPA2PSK
D security access.
Secu This parameter defines the security mode used for the wireless network when the SSID is hidden. 3 Modes are
rity available:
Mod
● WEP
e for
● WPA/WPA2 PSK3
Hidd
● WPA Enterprise: This feature allows using 802.1x WPA2-Enterprise secure network authentication.
Table 23: Bluetooth