Grandstream Networks WP820 Administration Manual page 40

en
SSID
When WPA Enterprise is selected, users can choose one of the below EAP methods which can be configured for
credential based or certificate authentication.
EAP
● PEAP
Met
● TLS2
hod
● TTLS
● PWD
CA
Certi
Upload the 802.1x CA certificate to the phone; or delete existed 802.1x CA certificate from the phone.
ficat
e
Iden
Enter the Identity information for the 802.1x mode.
tity
Pass
Configures the hidden ESSID password.
word
Advanced Settings
Cou
Configures Wi-Fi country code. The default value is "United States of America".
ntry
Cod
Note: Reboot is requested to take effect.
e
Host
Nam
e
Specifies the name of the client. This field is optional but may be required by some Internet Service Providers.
(Opti
on
12)
Ven
dor
Clas
Used by clients and servers to exchange vendor class ID.
s ID
(Opti
on
60)
Cha
"Auto" mode is enabled by default, in this mode, devices will do fully scanning; "Customize" mode is used to specify
nnel
Mod channels, and only the selected channels will be scanned and used to make network switch and roaming decision.
e
Wi-Fi Roaming
Sign
Sets the Wi-Fi signal threshold. When the Wi-Fi signal strength of the device drops below this configured value, the
al
Thre device will scan for a hotspot above the threshold value and connect to it. The default setting is -70 and the valid
range is [-100, -30].
shol
d
Roa This feature sets the minimum signal gap of roaming between different APs. When the signal strength difference
ming between the scanned AP and the current is greater than this value, roaming will be triggered.
Gain
(dB)