Replacing Blades - Fieldmann FZV 70905-0 User Manual

EN EN 8 8

Replacing blades

NOTE: For use without the grass catcher, the lawnmower may be used without the collection basket with
the protective cover qa in the lower position.
8. REPLACING BLADES
DANGER!
The cylinders may cause injuries!
Prior to replacement, disconnect the machine from the power grid and wait for the cylinder to come to
a stop. When replacing, wear work gloves.
1. Screw out bolt 1 on the underside of the
chassis (fig. 8).
2. Lift the cylinder 3 at an angle and pull it
out (fig. 9).
3. Slide the second cylinder on to the drive
shaft so that the pin 5 fits into the
respective part of the drive shaft 4 (fig.
10).
4. Tighten the screw 1 to secure again
(fig.8)
8
9
10
FZV 70905-0