Table of contents Verticutter OPERATION MANUAL Thank you for purchasing this garden verticutter. Before you start using it, please read carefully this operating manual and keep it for future reference. TABLE OF CONTENTS APPENDIX OF FIGURES ......................... 3 GENERAL SAFETY INSTRUCTIONS ..................10 Important safety warnings Packaging Instructions for use...
General safety instructions 1. GENERAL SAFETY INSTRUCTIONS Important safety warnings Unpack the product carefully and be sure not to throw away any part of the package before having found all components of the product. Keep the product in a dry place out of reach of children. Read all cautions and instructions.
Symbols 2. SYMBOLS Attention! Before putting the machine into operation, read carefully the operating instructions and general safety instructions! Do not use the machine in the rain or impaired weather conditions! Beware. After turning the verticutter off, the blade keeps rotating for a while! Keep safe distance! Beware.
Symbols | Machine description and package content Always switch off the engine and remove the plug from mains before performing any adjustment or maintenance of the machine or if the power supply cable is entangled or damaged. Use protective equipment while working.
Machine description and package content | Safety instructions Package Content Remove the machine carefully from the packaging and check the completeness of the following parts: electric verticutter two exchangeable cylinders installation kit operating instructions When parts are missing or damaged, please contact your dealer. 4.
Safety instructions Working posture: Be sure you are well balanced with sure footing while working. Exercise extreme caution when changing direction on slopes. Attention! Exercise extreme caution when walking backwards. You could stumble! Do not use the verticutter in the rain or in humid or wet conditions. Do not operate the verticutter near pool or garden lake edges.
Purpose of use | Machine assembly 5. PURPOSE OF USE Intended Use The electric verticutter LS-S3201 is intended for aeration of lawns and grass areas in private home gardens and garden plots. It is not intended for use in public facilities, parks, sports grounds, roads, in farm sector and in forestry.
Machine assembly | Operation | Maintenance Note: In case of use other than grass collection, the lawnmower can be used without the grassbox attached but with the protective guard engaged. 7. OPERATION (Fig. 3) Attach the Extension Cable Attach the cable holder (A2) to the upper handle Starting and Stopping Attention! Make sure the cylinder stopped rotating before switching “on”...
Maintenance | Cylinder replacement | Troubleshooting Adjustment after Wear and Tear (Fig. 5) Note: Do not use wear adjustment to adjust height. Adjusting the cylinder of the verticutter without any visible wear and tear may result in damage to the cylinder of the verticutter or engine stalling.
If the machine cuts out again, increase the verticutting / aeration height to reduce the load of the engine. 11. TECHNICAL DATA Electric verticutter ..........................FZV 4001-E Rated power ..............................1300 W Blade length ..............................32 cm Cutting height ..........................+3/-3/-6/-9 mm Grassbox capacity .............................
Disposal 12. DISPOSAL INSTRUCTIONS AND INFORMATION ON DISPOSAL OF USED PACKAGING. Put any used package material to the place determined by the municipality for waste disposal. DISPOSAL OF USED ELECTRIC AND ELECTRONIC EQUIPMENT This symbol on products or accompanying documents means that used electric or electronic products must not be put to ordinary municipal waste.
Need help?
Do you have a question about the FZV 4001-E and is the answer not in the manual?
Questions and answers