Preparation; Operation; Assembling The Machine - Fieldmann FZV 70905-0 User Manual

EN EN 6 6
Preparation | Operation | Assembly of the machine

5. PREPARATION

When operating the machine, always wear sturdy shoes and long pants. Do not operate the machine in bare
feet or in sandals. Avoid wearing clothes that are loose or have loose cords, or a tie.
Fully inspect the area where the machine is to be used and remove all objects that may be thrown by it.
Before use, always visually inspect the machine to see if that cutting unit, the bolts and the latter assembly are
not worn or damaged, Replace worn or damaged components in order to maintain good balance. Replace
damaged or illegible labels.

6. OPERATION

Never allow a child or other person who has not read the operating instructions to use the garden tool. Local
regulations may set a minimum age limit for the user.
Mow only in daylight or in good artifical light.
Do not work with the lawn mower in adverse weather conditions.
Only take the device at pace, never run.
Never use the lawn mower without the safety equipment.

7. ASSEMBLING THE MACHINE

1. Attach the handle's bottom parts (fig.2, point 7)
using the screw (point 14). Adjust the required
handle height using the XZN spline (point 17).
2. Screw on the handle's middle part with the
power cord safety clamp attached using the fast
coupling lever and the handle screw
(fig. 3).
2
3
FZV 70905-0