Replacing Blades - Fieldmann FZV 4005 E User Manual

7. REPLACING BLADES

DANGER!
The cylinders may cause injuries!
Prior to replacement, disconnect the machine from the power grid and wait for the cylinder to come to a stop.
When replacing, wear work gloves.
Screw out the bolts 1 on the underside
1.
of the chassis (fi g. 8).
2. Lift the cylinder 3 at an angle and pull it
out (fi g. 9).
3. Remove the ball bearing housing 2
from the cylinder shaft (fi g. 9).
4. Slide the ball bearing housing 2 on to
another cylinder.
5. Slide the second cylinder on to the drive
shaft so that the pin 5 fi ts into the re-
spective part of the drive shaft 4 (fi g.
10).
6. Screw the ball bearing housing 2 to the
underside of the chassis but do not tight-
en too much.
ELECTRIC SCARIFIER
8
9
10
9 9
Blade replacement
USER'S MANUAL
EN EN