7. REPLACING BLADES
DANGER!
The cylinders may cause injuries!
Prior to replacement, disconnect the machine from the power grid and wait for the cylinder to come to a stop.
When replacing, wear work gloves.
Screw out bolt 1 on the underside of
1.
the chassis (fi g. 8).
2. Lift the cylinder 3 at an angle and pull it
out (fi g. 9).
3. Slide the second cylinder on to the drive
shaft so that the pin 5 fi ts into the re-
spective part of the drive shaft 4 (fi g.
10).
4. Tighten the screw 1 to secure again
(fi g.8)
ELECTRIC SCARIFIER
8
9
10
Replacing blades
11
USER'S MANUAL
EN