Fieldmann FZV 70905-0 User Manual page 9

3. Screw on the handle's top part (fig. 4).
4. Attach the power cord to the handle using the plastic clips (fig.5).
4
5. Place the steel frame 0 into the textile
collection basket 9 and attach all fastener
to the left, right and rear poles of the frame.
Make sure that all fasteners are secured
correctly (fig. 6).
6. Installation of the completely assembled
collection basket on to the scarifier (fig. 7).
A. Lift up the protective cover qa.
B. Make sure that the ejection chute is clear
and free of debris.
C. Place the fully assembled collection
basket on to the fastening points in the
rear part of the chassis, as shown.
D. Place the protective cover qa on top
of the collection basket. Check that the
collection basket is seated correctly.
CORDLESS SCARIFIER
Assembling of the machine
5
6
7
7 7 EN EN
USER'S MANUAL