(7) While pressing the actuator, remove the MP paper detection sensor PCB and MP
paper detection sensor holder.
(8) Remove the MP paper detection sensor harness off the MP paper detection sensor PCB.
(9) Remove the MP paper detection sensor PCB off the MP paper detection sensor holder.
Actuator
9.3
MP Tray ASSY
(1) Remove the Shaft.
(2) Remove the two screws (TAPTITE CUP B M4x12), and remove the MP tray ASSY
upwards while pulling it to the front.
Note: Put the MP tray ASSY with its back down.
7a
MP paper detection sensor harness
MP paper detection sensor PCB
Shaft
Fig. 3-6
MP tray ASSY
Fig. 3-7
3-28
7b
9
MP paper detection sensor
holder
TAPTITE CUP B M4x12
Confidential