T2 Base Pad - Brother MFC-J2320 Service Manual

9.50 T2 Base Pad

(1) If the T2 base pad needs to be replaced, peel it off the bottom of the Paper tray
ASSY 2.
Note: Once removed, the T2 base pad will become unusable and a new pad will have
to be put back in.
Depressed section
Assembling Note: When attaching a new T2 base pad to the Paper tray ASSY 2, align
the front edge of the pad with that of the Depressed section on the Paper tray ASSY 2
and center the pad widthways as shown above.
T2 base pad
T2 base pad
Fig. 3-125
3-109
Paper tray ASSY 2
Paper tray ASSY 2
Align the edge of the T2 base pad
with the front edge of the depressed
section at the bottom of the Paper
tray (this line).
Confidential