Head/Carriage Unit Cannot Shift To Head Capping Position; Head/Carriage Unit Cannot Shift To Head Uncapping Position; Head Property Information Not Input - Brother MFC-J2320 Service Manual

Error Code 75

Unable to Print 75

Head/carriage unit cannot shift to head capping position.

Error Code 76
Unable to Print 76

Head/carriage unit cannot shift to head uncapping position.

Step
1 CR encoder strip out of place
2 Foreign materials in the
maintenance unit
3 Foreign materials in the engine
unit
4 Carriage motor defective
5 Switching lever guide defective
Maintenance unit defective
6 Main PCB defective
Error Code 7E

MACHINE ERROR 7E

Head property information not input.

Step
1 Head property information not
input
2 Main PCB defective
Cause
Set the CR encoder strip into place.
Remove foreign materials.
Remove foreign materials.
Replace the carriage motor ASSY.
Replace the maintenance unit.
Replace the main PCB ASSY.
Cause
Input the head property information (refer to
Chapter 5, Section
Replace the main PCB ASSY.
2-41
LCD
LCD
Solution
LCD
Solution
1.3.25.)
Confidential