Load Paper In The Multi-Purpose Tray (Mp Tray) - Brother DCP-T520W Online User's Manual

Home > Paper Handling

Load Paper in the Multi-purpose Tray (MP Tray)

Related Models: DCP-T820DW/DCP-T825DW/MFC-T920DW/MFC-T925DW
Use the MP Tray for special print media, such as photo paper or envelopes.
• If the [Check Paper] setting is set to [On] and you set the paper in the MP tray, a message appears on
the LCD, allowing you to change the paper size and paper type.
• Load only one size and type of paper in the paper tray at a time.
• When you load a different paper size in the tray, you must change the Paper Size setting in the machine or
the paper size setting on your computer.
Doing this enables the machine to automatically feed paper from the appropriate tray if Auto Tray Select
has been set in the printer driver (Windows) or on the machine.
NOTE
To prevent dust from entering the machine, be sure to close the MP tray if you are not using the tray.
1. Open the MP tray using both hands.
2. Lift the paper support.
> Load Paper > Load Paper in the Multi-purpose Tray (MP Tray)
38