Brother MFC-J2320 Service Manual page 54

Code 1 Code 2
Remote terminal only with V.29 capability in 2,400 or
32 01
4,800 bps transmission.
32 02 Remote terminal not ready for polling.
Remote terminal not equipped with password function, or
32 10
password function switch is OFF.
Remote terminal not equipped with or not ready for
32 11
confidential mailbox function.
Remote terminal not equipped with or not ready for relay
32 12
function.
32 13 No confidential mail in the remote terminal.
The available memory space of the remote terminal is
32 14 less than that required for reception of the confidential or
relay broad-casting instruction.
32 16 Remote terminal not equipped with SEP function.
32 17 Remote terminal not equipped with SUB function.
32 18 Remote terminal not equipped with color function.
40 02 Illegal coding system requested.
40 03 Illegal recording width requested.
40 05 ECM requested although not allowed.
40 06 Polled while not ready.
40 07 No document to send when polled.
There is no data in the box No. specified by F code
40 08
communication.
40 10 Nation code or manufacturer code not coincident.
Group number not registered in relay broad-casting
40 11 commanded, or commanded total broad-casting number
exceeds maximum broadcast enabled number.
40 12 Retrieval while not in retrieval stand-by.
Received polling from other maker products during
40 13
confidential polling stand-by.
40 17 Invalid resolution selected.
Retrieval is commanded although remote retrieval of F
40 18
code is not available.
Remote registration is commanded although remote
40 19
registration of F code is not available.
40 20 Invalid full-color mode requested.
Cause
2-17
Refer to
page:
Section
4.9.3
"A commu-
nications
error
occurs"
Confidential