Brother MFC-J2320 Service Manual page 165

(10)Open the ADF unit, and raise it slightly avoiding the Stopper of the Document
scanner unit.
(11) From the front side of the ADF hinge L/R fitting hole, put in a cable tie-like tool with
its edge bent, and pull out the ADF unit.
(12)Pull the ADF unit harness off the Document scanner unit.
Assembling Note: Before wiring the harnesses of the ADF unit through the Harness
holder, put a 20-mm-thick pad on the Scanner glass of the Document scanner cover.
Otherwise, when you scan a thick book on the Scanner glass, the ADF unit cannot be
closed due to those tense harnesses.
ADF
hinge L
11c
Stopper
10
11b
Cable tie
Fig. 3-17
3-35
ADF unit
ADF unit
Stopper
ADF hinge R
Stopper
Document
scanner unit
11a
Confidential