If You Replace The Paper Feeding Related Parts And Maintenance Unit - Brother MFC-J2320 Service Manual

Inkjet dcp/mfc
Hide thumbs Also See for MFC-J2320:
Table of Contents

Advertisement

6
IF YOU REPLACE THE PAPER FEEDING RELATED PARTS and
MAINTENANCE UNIT
The paper feeding related parts to be adjusted after replacement are listed below.
- Paper feed roller
- Paper ejection roller
- Switchback roller
- Carriage motor
- Paper feed motor
- CR encoder strip
- PF encoder disk
- PF encoder sensor PCB ASSY
- CR timing belt
<Operations>
6.1 Check head nozzles (Maintenance mode 09)
6.2 Adjustment of software correction for inclination/corrugation/ruled lines
(Maintenance mode 65)
6.3 Updating of paper feeding correction values (Maintenance mode 58)
6.4 Adjustment of margins in borderless printing (Maintenance mode 66)
6.5 Check printing
<Requirements>
(1) USB cable (one piece)
(2) PC (Windows
Create a temporary folder in the C drive.
(3) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(4) Maintenance driver (MaintenanceDriver.zip), if not installed
Make a copy of the maintenance driver in the temporary folder in the C drive.
Extract the copied file and install it, referring to
Maintenance Printer Driver."
(5) USB flash memory or SD card
(6) Data files of print patterns
®
XP or later)
- Registration sensor PCB ASSY
- Carriage PCB ASSY
- Platen
- Flushing box
- Flushing base
- Maintenance unit
4-19
Appendix 3 "Installing the
Confidential

Advertisement

Table of Contents
loading

Table of Contents