Structure Of The Parameter Groups - WEG MVW3000 Programming Manual

KEYPAD (HMI) OPERATION
Parameter Group.
Parameters.
Error Log.
Parameter edition:
Numerical Parameters.
Alphanumerical Parameters.
Indication of occurred fault, alarm or notification.
Help Function (only for parameters in this software version).
3
Graphic Functions:
Watch Function.
When the initialization is finished the display enters the parameter monitoring mode. The number of presented
parameters can be programmed through the read-only and selection parameters (P0500...P0505), and the font
size varies according to the number of parameters programmed for monitoring, according to
Motor Rdy
Motor Speed
P0002:
1800
Trend 13:38
Figure 3.4: Parameter monitoring modes Monitoring of 1 parameter (left), 2 to 4 parameters and 5 to 6 parameters
In the read-only parameter monitoring mode, the main HMI navigation menu can be accessed through the quick
access Softkey [Menu] (SK2) or through the [ENTER] key.

3.2.2 Structure of the Parameter Groups

Selecting the [Menu] option from the monitoring mode displays the parameter group navigation menu
page 3-5.)
The Menu is composed by several access levels
done by means of the softkeys SK1 [Return] and SK2 [Select]. In order to select one group the Prog/Enter key or
the softkey SK2 [Selec.] can be used.
MVW3000 | 3-4
1800rpm
LOC Motor Rdy
P0002:
P0003:
P0005:
rpm
Menu Trend
1800rpm
LOC
1800
Speed
rpm
Speed Ref
200.0
A
Mo current
60.0
Inv. Status :
Hz
Output Volt.:
Frequency:
13:38 Menu
(Table 3.2 on page 3-7). The navigation through these levels is
Figure 3.4.
1800rpm
Motor Rdy LOC
: 1800 rpm
: 1800 rpm
: 205 A
Motor Rdy
60.0 Hz
4160 V
Trend 13:38 Menu
(Table 3.1 on