Making Input Connections - Fluke ScopeMeter 190 II Series User Manual

Input Connections
ALL INPUTS ISOLATED
!
ALL INPUTS ISOLATED
Figure 5. Measurement Connections
!
Using the Scope and Meter

Making Input Connections

own
Warning
To avoid electrical shock use the insulation
sleeve (Figure 1 item e)) if you use the probes
without the hook clip or the ground spring.
Notes
To maximally benefit from having
independently isolated floating inputs and to
avoid problems caused by improper use,
read Chapter 6: "Tips".
For an accurate indication of the measured
signal, it is necessary to match the probe to
the test tool's input channel. See section
'Calibrating the voltage Probes' in Chapter 7.
Input Connections
each