Processor - Huawei FusionServer Pro 2488H V6 Technical White Paper

Huawei FusionServer Pro 2488H V6 Server
Technical White Paper
Port
Serial port
VGA port
USB 3.0 port
PSU socket

5.3 Processor

●
●
●
●
Issue 03 (2021-02-01)
Type
RJ45
DB15
USB 3.0
-
The server supports two or four processors.
If two processors are required, install them in sockets CPU1 and CPU2.
Processors of the same model must be used in a server.
Contact your local Huawei sales representative or see "Search Parts" in the
Computing Product Compatibility Checker
be used.
Copyright © Huawei Technologies Co., Ltd.
Quantity Description
1 Default operating system
serial port used for debugging.
You can also set it as the iBMC
serial port by using the iBMC
command.
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
1 Used to connect a display
terminal, such as a monitor or
KVM.
2 Used to connect to a USB
device.
NOTICE
Before connecting an external
USB device, check that the USB
device functions properly;
otherwise, it may adversely
impact the server.
2 Used to connect to a power
distribution unit (PDU)
through a power cable. You
can select the PSUs as
required.
NOTE
● When determining the PSUs,
● If only one PSU is used, Work
to determine the components to
5 Hardware Description
ensure that the rated power
of the PSUs is greater than
that of the server.
Mode cannot be set to
Active/Standby on the Power
page of the iBMC WebUI.
22