Operating Versicharge; Led Light Display - Siemens VersiCharge AC Installation And Operation Manual

SECTION 8

Operating VersiCharge

8.1 LED Light Display

Display
Normal Operation
Applicable to commercial units,
only if RFID is enabled.
Applicable to commercial units,
if RFID is enabled.
Lights up white
LED off
Lights up white
Lights up white
Flashes white
Lights up red
Lights up orange
Description
Charger is locked.
Charger is unlocked.
Charging station is ready.
Charging is paused.
Vehicle is connected.
Charging in progress.
After switching on, the charger
will go to Access Point mode.
No Wi-Fi.
Charger is connected to router.
Weak Wi-Fi.
Installation and Operations Manual VersiCharge™ AC
Action
Pass the RFID card in front of the reader to unlock and
begin charging.
Enable RFID authentication. To unlock, pass an RFID card
over the RFID reader.
NOTE: The charger is in the unlocked state by default.
Charging can be resumed through the Sifinity Go mobile app.
Connect PC or mobile device for commissioning, charger is
ready to be added to the account.
Check the router.
Strengthen the Wi-Fi.
31