Application Setup; Mobile App User Registration - (Residential Units Or Commercial-Single Charger); Create An Account - Siemens VersiCharge AC Installation And Operation Manual

VersiCharge™ AC Installation and Operations Manual
SECTION 5

Application Setup

Siemens is proud to offer industry-leading control and monitoring functionality built into the VersiCharge product.
1. Smartphone Application. This is the preferred method for VersiCharge charger owners with 10 or less chargers per account.
Search for Sifinity Go in the
Android operating system. Download the application.
2. PC Application. The VersiCharge Configuration Tool is the preferred method for VersiCharge owners and installers that are
commissioning multiple chargers, such as with parent-child configurations.
NOTE: In case of a Wi-Fi network failure, the charger will continue to function based upon the registered state. If the
schedule function is enabled, it will continue to run indefinitely. All demand response settings will be saved. User
interface functionality will remain the same.
5.1 Mobile App User Registration
NOTE: If the charger is moved or ownership changes, it must be deregistered prior to recommissioning.
Deregistering the unit can be done through the mobile app or VersiCloud for multiple chargers.
• Install the Sifinity Go mobile application from the
connection on your VersiCharge). Upon opening the app, follow the prompted instructions to create an account and
set up your charger(s), if you are configuring 10 or fewer charges per your account. The web app
(https://www.versichargesg.com/Account/Login?ReturnUrl=%2f%20) and smartphone app follow the same steps.

5.1.1 Create an Account

NOTE: If a charger is moved to another network or if ownership is changed, the charger must be deregistered before
recommissioning. The charger will not automatically commission to a new network, but remembers the initially commissioned
network.
The following process links your VersiCharge to your chosen wireless network, enabling communication with the Siemens Cloud network.
• Follow next steps to add a charger to your account.
NOTE: Residential 40 A Unit Only - Before beginning to link the charger to an account, ensure the breaker powering
the dedicated branch circuit is 'OFF'; plug in the VersiCharge. Turn the breaker 'ON' after plugging the unit in.
• The Power Available LED will turn white and the Wi-Fi Status LED will go through the following process:
- The indicator should initially slowly blink red, switch to slowly blinking yellow, and then slowly blink white.
- Once the indicator slowly blinks white, the charger has transitioned to Access Point (AP) mode, will switch to blinking
white, and is ready to be connected to a Wi-Fi, LAN or cellular network.
• Once in AP mode, you may use your Sifinity Go mobile app or your laptop to commission the VersiCharge to a
network with an open internet connection to establish connection to the Siemens VersiCloud system for management
and to receive periodic charger updates.
26
App Store for the iOS operating system (for iPhone owners) or in the
Google Play Store or Apple App Store (ensure you have an internet
Google Play Store for the