Environmental Conditions - Keysight Infiniium 9000 Series Service Manual

Environmental Conditions

Overvoltage This product is intended to be powered by MAINS that comply to Overvoltage
Category Category II, which is typical of cord-and-plug connected equipment.
Pollution Degree The 9000 Series oscilloscope may be operated in environments of Pollution
Degree 2 (or Pollution Degree 1).
Pollution Degree Pollution Degree 1: No pollution or only dry, non-conductive pollution occurs. The
Definitions pollution has no influence. Example: A clean room or climate controlled office
environment.
Pollution Degree 2. Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation may occur.
Example: General indoor environment.
Pollution Degree 3: Conductive pollution occurs, or dry, non-conductive pollution
occurs which becomes conductive due to condensation which is expected.
Example: Sheltered outdoor environment.
Infiniium 9000 Series Oscilloscopes Service Guide
1
General Information
15