Front Operator Panel Leds - Lenovo ThinkSystem SR665 V3 User Manual

Drive LED
Drive activity LED (left)
1
Drive status LED (right)
2

Front operator panel LEDs

This topic provides information on the front operator panel LEDs.
The following illustration shows the front operator panel on the media bay. For some server models, the front
operator panel is integrated on the rack latch. See
Figure 142. Front operator panel LEDs
Power button with power status LED (green)
1
System ID button with system ID LED (blue)
3
1 Power button with power status LED (green)
You can press the power button to power on the server when you finish setting up the server. You also can
hold the power button for several seconds to power off the server if you cannot shut down the server from
the operating system. The states of the power LED are as follows:
Status Color
Off None
Fast blinking Green
(about four
flashes per
second)
Slow blinking Green
(about one flash
per second)
Solid on Green
2 Network activity LED (green)
Compatibility of the NIC adapter and the network activity LED:
Status
Solid green
Blinking green
Solid yellow
Blinking yellow (blinking slowly, about one
flash per second)
Blinking yellow (blinking rapidly, about four
flashes per second)
"Front I/O module" on page
Description
Power is not present, or the power supply unit has failed.
• The server is off, but the XClarity Controller is initializing, and the server is not
ready to be powered on.
• System-board-assembly power has failed.
The server is off and is ready to be powered on (standby state).
The server is on and running.
Description
The drive is powered but not active.
The drive is active.
The drive has an error.
The drive is being rebuilt.
The drive is being identified.
15.
Network activity LED (green)
2
System error LED (yellow)
4
Chapter 8
.
Problem determination
199