Lenovo ThinkSystem SR665 V3 User Manual page 63

CAUTION:
Do not place any object on top of a rack-mounted device unless that rack-mounted device is intended
for use as a shelf.
CAUTION:
• Potential stability hazards exist. The rack might tip over and cause serious personal injury.
• Before extending the rack to the installation position, read the
Do not put any load on the slide-rail mounted equipment in the installation position. Do not leave
the slide-rail mounted equipment in the installation position.
About this task
Attention:
• Read "Installation Guidelines" on page 39
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
CAUTION:
Make sure to have three people operate the server installation procedures to prevent injury.
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/tw/en/products/servers/thinksystem/sr665v3/7d9a/downloads/
driver-list/ to see the latest firmware and driver updates for your server.
• Go to "Update the firmware" on page 189
Watch the procedure
A video of this procedure is available at YouTube:
DR4X1YAcp9wFKhwj_tLQ5Y
Procedure
Step 1. From the front of the rack, pull the rails all the way out until they stop.
Attention: You can only install the server successfully when the rails are fully extended.
and "Safety inspection checklist" on page 40
48.
for more information on firmware updating tools.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Installation Guidelines" on page
.
Chapter 5 Hardware replacement procedures
39.
to ensure that you
53