Install A Riser Assembly - Lenovo ThinkSystem SR665 V3 User Manual

After you finish
1. Install the riser assembly into chassis. See
2. If you have installed a RAID 940 adapter, install a RAID flash power module. See
module replacement" on page

Install a riser assembly

Follow instructions in this section to install a riser assembly.
About this task
Attention:
• Read "Installation Guidelines" on page 39
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
DR4X1YAcp9wFKhwj_tLQ5Y
Procedure
Step 1. Install the riser assembly into the chassis.
• Riser 1 assembly (same for riser 2 assembly)
ThinkSystem SR665 V3 User Guide
104
"Install a riser assembly" on page
127.
and "Safety inspection checklist" on page 40
48.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
104.
"RAID flash power
to ensure that you