Figure 59. Removing the riser card from riser 1 cage or riser 2 cage
Figure 60. Removing the riser card from riser 3 cage
a.
Loosen the screws that secure the riser card.
b.
Grasp the riser card by its edges and carefully take it out of the riser bracket in the shown
direction.
After you finish
1. Install a new PCIe adapter to the riser assembly. See
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a PCIe adapter
Follow instructions in this section to install a PCIe adapter.
About this task
Attention:
• Read
"Installation Guidelines" on page 39
work safely.
"Install a PCIe adapter" on page
and
"Safety inspection checklist" on page 40
Chapter 5
101.
to ensure that you
.
Hardware replacement procedures
101