Procedure
Step 1.
Make preparation for the task.
a.
If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the
top cover, or remove the server from the rack. See
b.
Remove the top cover. See
c.
Remove the riser assembly. See
Step 2.
Remove the PCIe adapter from the riser assembly.
Figure 57. Removing the PCIe adapter from riser 1 or 2 assembly
Figure 58. Removing the PCIe adapter from riser 3 assembly
a.
Press the retainer clip downward.
b.
Rotate the PCIe adapter retention latch to the open position.
c.
Grasp the PCIe adapter by its edges and carefully pull it out of the PCIe slot.
Step 3.
(Optional) If you are replacing the riser card, remove the riser card from the riser cage.
ThinkSystem SR665 V3 User Guide
100
"Remove the server from rack" on page
"Remove the top cover" on page
"Remove a riser assembly" on page
161.
97.
49.