Grandstream Networks GRP260X Series Administration Manual page 9

Connecting the GRP260X
To set up the GRP260X, follow the steps below:
1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the
Ethernet cable.
3. Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an electrical outlet. If a PoE
switch is used in step 3, this step could be skipped (For GRP260xP/G).
4. The LCD will display the Grandstream logo. Before continuing, please wait for the date/time display to show up.
5. Using the phone embedded web server or keypad configuration menu, you can further configure the phone using either a
static IP or DHCP.
Using Wi-Fi (GRP2602W only):
– On the LCD menu, navigate to "Settings → Wi-Fi settings" and enable Wi-Fi.
– Select "Wi-Fi Network" and GRP2602W will automatically start scanning within the range.
– A list of Wi-Fi networks will be displayed. Select the desired network, and if required, enter the correct password to connect.
– Users can add and connect to a hidden network by accessing "Wi-Fi" Network" and then press on Add softkey
enter the Network's information.
Notes:
When the GPR2602W is not connected to any network (including Ethernet and Wi-Fi), a prompt interface will pop up to notify
users about it. Users can quickly enter the "Wi-Fi Network" page by pressing on the Wi-Fi softkey.
For easy deployment, The GRP2602W is preconfigured out of the box to connect to a default SSID named wp_master with a
password (WPA/WPA2 PSK) equal to wp!987@dmin, users can adapt these settings from the web UI as well to make it easier
for deployment on customer site.
The QR code of SSID can be displayed to share with cellphones and other devices.
Figure 3: Tab on the Handset Cradle
. Then