Grandstream Networks GRP260X Series Administration Manual page 41

Presence Watcher:
● This option has to be supported by a presence server and it is tied to the "Do Not Disturb" status of the phone's
extension.
Eventlist BLF:
● This option is similar to the BLF option but in this case the PBX collects the information from the phones and
sends it out in one single notify message. PBX server has to support this feature.
Speed Dial via active account:
● Similar to Speed Dial but it will dial based on the current active account. For example, if the phone is offhook
and account 2 is active, it will call the configured Speed Dial number using account 2
Dial DTMF:
● Enter a series of DTMF digits in the Value field to be dialed during the call. "Enable MPK Sending DTMF" has
to be set to "Yes" first.
Voicemail:
● Select Account and enter Voicemail access number in the Value field.
Call Return:
● The last answered calls can be dialed out by using Call Return. The Value field should be left blank. Also, this
option is not binding to the account and the call will be returned based on the account with the last answered
call.
Transfer:
● Select Account and enter the number in the Value field to be transferred (blind transfer) during the call.
Call Park:
● Select Account and enter the call park extension in the Value field to park/pick up the call.
LDAP Search:
● This option is to narrow the LDAP search scope. Enter the LDAP search base in the Description field. It could
be the same or different from the Base in LDAP configuration under Advanced Settings. The Base in LDAP
configuration will be used if the Description field is left blank. Enter the LDAP Name/Number filter in the
Value field.
For example:
If users set MPK 1 as "LDAP Search" for "Account 1", and set filters:
Description -> ou=video,ou=SZ,dc=grandstream,dc=com
Value -> sn=Li
Since the Base for LDAP server configuration is: "dc=grandstream,dc=com", "ou=video,ou=SZ" is added to
narrow the LDAP search scope. "sn=Li" is the example to filter the last name.
Conference:
● Allow user to set their Multi-Purpose Key to "Conference" mode to trigger a conference.
● By setting the extension number in the value box, the users will be able to activate a 3-way conference by
simply press the assigned MPK button.
Multicast Paging:
● Allows the user to configure the address to send a multicast page to.
Call Log:
● Select Account and enter account number in the Value field to allow configuration of call log for other
extension.
Monitored Call Park:
● Select account from Account field and enter the call park extension in the Value field to park/pick up the call,
and also monitor the parked call via Line Key's light.
Menu:
● Select this feature in order to display the Menu from the MPK buttons, no field dis required for configuration.
Information:
● Select this feature in order to display the Information popup to show the firmware version, MAC address, IP
address and IP Settings from the MPK buttons, no field dis required for configuration.