Table of Contents
Advertisement
Config Server
The username for the HTTP/HTTPS server.
Username
Config Server
The password for the HTTP/HTTPS server.
Password
Always
Authenticate
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials before being challenged by the server.
Before
Challenge
Config File
Enables your ITSP to lock configuration updates. If configured, only the configuration file with the matching
Prefix
encrypted prefix will be downloaded and flashed into the phone.
Config File
Enables your ITSP to lock configuration updates. If configured, only the configuration file with the matching
Postfix
encrypted postfix will be downloaded and flashed into the phone.
Authenticate
Authenticates configuration file before acceptance.
Conf File
XML Config
The password for encrypting XML configuration file using OpenSSL. This is required for the phone to decrypt the
File Password
encrypted XML configuration file.
Provision
Auto Upgrade
Enables automatic upgrade and provisioning.
Automatic
Upgrade
The default setting is "No".
Start Upgrade
Configures whether the phone will upgrade automatically at a random time within the configured time interval.
at Random
The default setting is "No"
Time
Specifies how firmware upgrading and provisioning request to be sent: Always
Firmware
Check for New Firmware, Check New Firmware only when F/W pre/suffix
Upgrade and
Changes, Always Skip the Firmware Check.
Provisioning
The default setting is "Always Check for New Firmware".
If set to "Yes", the phone will ask the user to upgrade. If there is no response, the phone will proceed with the upgrade.
Firmware
Upgrade
If set to "No", the phone will automatically upgrade without user input.
Confirmation
Default setting is Yes.
DHCP Option
Allow DHCP
DHCP option 66 originally was only designed for TFTP server. Later, it was extended to support an HTTP URL. GRP
Option 43 and
phones support both TFTP and HTTP server via option 66. Users can also use DHCP option 43 vendor specific option
Option 66
to do this. DHCP option 43 approach has priorities. The phone is allowed to fall back to the original server path
Override Server
configured in case the server from option 66 fails. The default setting is "Yes".
Allow DHCP
Option 120 to
Enables DHCP Option 120 from local server to override the SIP Server on the phone. The default setting is "No".
override SIP
Server
Additional
When enabled, users could select Option 150 or Option 160 to override the firmware server instead of using the
Override DHCP
configured firmware server path or the server from option 43 and option 66 in the local network. Please note this
Option
option will be effective only when option "Allow DHCP Option 43 and Option 66 to Override Server" is enabled.
Advertisement
Table of Contents
