Table of Contents
Advertisement
Enable Call Waiting
RFC2543 Hold
Ring Timeout
Call Log
Auto Answer
Auto Answer
Auto Answer Numbers
Intercom
Play warning tone for Auto Answer
Intercom
Custom Alert-Info for Auto Answer
Allow Auto Answer by Call-Info/Alert-
Info
Allow Barging by Call-Info/Alert-Info
Mute on Intercom Answer
Record
Record Key Default Fuction
Call Recording On
Configures the call waiting function for this account. If set to "Default", it will be configured
according to global call waiting function. Default value is "Default".
Allows users to toggle between RFC2543 hold and RFC3261 hold. RFC2543 hold (0.0.0.0)
allows user to disable the hold music sent to the other side. RFC3261 (a line) will play the
hold music to the other side. The default setting is "No".
Configures the timeout (in seconds) for the phone to ring when an incoming call is not
answered. Valid range is 30 to 3600. The default setting is 60.
Configures Call Log setting on the phone.
● Log All Calls
● Log incoming/Outgoing Only (missed calls NOT recorded)
● Disable Call Log
The default setting is "Log All Calls".
If set to "Yes", the phone will automatically turn on the speaker phone to answer incoming
calls after a short reminding beep. Default setting is "No".
Allows the user to configure specific numbers to auto answer. If not set, all numbers will be
auto answered If auto answer is enabled. Up to 10 numbers can be configured.
If enabled, phone will play warning tone when auto answering Intercom.
Used exclusively to match the contents of the Alert-Info header for auto answer. The default
auto answer headers will not be matched if this is defined.
If set to "Yes", the phone will automatically turn on the speaker phone to answer incoming
calls after a short reminding beep, based on the SIP Call-Info/Alert-Info header sent from the
server/proxy.
Default is "Yes".
When enabled, the phone will automatically put the current call on hold and answer the
incoming call based on the SIP Call-Info/Alert-Info header sent from the server/proxy.
However, if the current call was answered based on the SIP Call-Info/Alert-Info header, then
all other incoming calls with SIP Call-Info/Alert-Info headers will be rejected automatically.
Default setting is "No".
If enabled, the phone will mute the mirophone after answer an intercom call via Call-
Info/Alert-Info.
Configures whether to turn the recording function on or off when the "Record" key is pressed
for the first time in a call using this account. For example, the SIP server can be configured
with automatic call recording. In this case, Record key default function should be configured
as "Record off".
Configures the DTMF sequence sent when pressing the Record key during a call on this
account. Toggles between this value and the off code if possible; otherwise always sends this
code.
Advertisement
Table of Contents
