Table of Contents
Advertisement
The default setting is "None".
Config Provision
Download and
By default, device will provision the first available config in the order of cfgMAC, cfgMAC.xml, cfgMODEL.xml,
Process ALL
cfg.xml and devMAC.cfg (corresponding to device specific, model specific, and global configs). If set to Yes, device
Available
will download and apply (overwrite) all available configs in the same order.
Config Files
User Protection
When user protection is on, pvalues that user sets will not be changed by provision or provider.
3CX Auto
Phone will multicast SUBSCRIBE for provision if this feature is enabled.
Provision
Advanced Settings
Validate
Hostname in
To validate the hostname in the SSL certificate
Certificate
Enable SIP
Notify
Device will challenge NOTIFY with 401 when set to Yes
Authentication
Factory reset
Press Start to begin Factory Reset of the phone.
Syslog
If set to SSL/TLS, the syslog messages will be sent through secured TLS protocol to syslog server.
Syslog Protocol
Default setting is "UDP".
Note: The CA certificate is required to connect with the TLS server.
The URL or IP address of the syslog server for the phone to send syslog to.
Syslog Server
Note: By adding port number to the Syslog server field (i.e., 172.18.1.1:1000), the phone will send syslog to the
corresponding port of that IP.
Selects the level of logging for syslog.
The default setting is "None". There are 4 levels: DEBUG, INFO, WARNING and ERROR.
Syslog messages are sent based on the following events:
● Product model/version on boot up (INFO level).
● NAT related info (INFO level).
● sent or received SIP message (DEBUG level).
Syslog Level
● SIP message summary (INFO level).
● inbound and outbound calls (INFO level).
● registration status change (INFO level).
● negotiated codec (INFO level).
● Ethernet link up (INFO level).
● SLIC chip exception (WARNING and ERROR levels).
● Memory exception (ERROR level).
Syslog Keyword
Syslog will be filtered based on keywords provided. If you enter multiple keywords, it should be separated by ','.
Filter
Please note that no spaces are allowed.
Send SIP Log
Configures whether the SIP log will be included in the syslog messages. The default setting is "No".
Maintenance �� System Diagnosis
Advertisement
Table of Contents
